Caretaker RetroClean TurboClean Flow Plus Head (Black) | 4-9-2009

Caretaker RetroClean 4-9-2009: TurboClean Flow Plus Head in Black

The Caretaker RetroClean 4-9-2009 is the Black Flow Plus replacement head for the matching TurboClean retrofit application. Match this part number to the head and fitting already installed before ordering.

Keep the nozzle configuration matched to the original cleaning layout so the replacement serves the intended floor-cleaning position.

Product Details

Confirm Your Retrofit Application

• Confirm that the existing system uses the TurboClean fitting and the matching RetroClean configuration.
• Match the flow plus nozzle configuration and Black color; a similar-looking head is not sufficient to establish fit.
• RetroClean models are made for specific retrofit applications. They are not universal replacements for all Caretaker, Pool Valet, TurboClean or QuikClean fittings.

Tool Selection and Service

Identify both the installed head and the original floor fitting before selecting a removal tool. The tool and procedure for the original system may differ from those used for a Caretaker replacement head. Contact ePoolSupply with photos of the head and fitting if you need help matching them.

Shut off the pump and prevent automatic restart before servicing. Inspect the fitting, seals and head for damage or debris. Follow the instructions for the specific retrofit assembly; do not force the head or apply a generic twist-and-lock procedure to a different fitting. After installation, run a complete cleaning cycle and check that the serviced head rises, directs water and retracts correctly.

Common Questions

Is this a universal Caretaker head?

No. 4-9-2009 is listed for the matching TurboClean retrofit application. Confirm the part number, fitting and nozzle configuration before ordering.

Can I change the nozzle configuration to get more cleaning power?

Use the configuration specified for that cleaning position. A different flow requirement can change the performance of other heads on the same zone.

What should I check before replacing the head?

Inspect for debris and confirm the cleaning zone receives proper water flow. If several heads on a zone have the same symptom, the issue may involve the supply or distribution valve rather than every head.

Support Documents

The PDF download is a general manufacturer overview of in-floor cleaning, not an installation manual for this retrofit part. Use the instructions supplied with the specific RetroClean assembly and original fitting for installation.

See the PDF Downloads section for the documents listed below.

• Jandy In-Floor System Overview Not Retrofit Instructions

Product Videos