Aladdin Sta-Rite PE, P2RA and AJ Series Pump Rebuild Kit, GO-KIT25-9

This Aladdin rebuild kit gathers the four parts that wear out on a Sta-Rite PE, P2RA or AJ series pump: the shaft seal, the clamp o-ring, the diffuser o-ring and the seal plate gasket. It is the set you want on the bench before you split the pump.

Why replace all four

Most Sta-Rite rebuilds start with a shaft seal that has started to weep, which shows up as water under the motor or rust creeping onto the motor face. Getting to that seal means pulling the clamp, the seal plate and the diffuser, and the o-rings and gasket on those parts have aged just as long as the seal has. Reusing them is how a rebuild turns into two rebuilds.

Confirm the pump first

Sta-Rite seal kits are specific to the pump family, so read the series off the pump or motor label before ordering. This kit is listed for the PE, P2RA and AJ series. It is catalogued under two numbers, GO-KIT25-9 and GOKIT25, which are the same kit.